Using reflective technology, and precision design reflective system, responsive
    to many existing lamp-house, ingeniously using reflection principle, effect of
    exhibits upgrade
Brightness and evenness upgrade
Solar energy conversion has reached over 80%, an average saving of energy
    consumption over 48%
    (Traditional light boxes average unit energy consumption of about 120w/m2.
    Using professional-T5 lamps and Rays reflective patent system, so that every
    LB average unit energy consumption reduce to 62w/m2, save energy over
    48%)
Reduce power consumption and heat
    (Rays patent lighting system, through clever use of "virtual lamp" to improve
    brightness and reduce lamp num, the temperature controlled under 37 degrees
    Celsius, higher safety standards, but also to reduce the temperature impact to
    the surrounding environment.)

Shanghai Pudong International Airport Successful Case
Pudong International Airport work island LB, luminance 4000 lux on white Poly film, much brighter than bright airport surrounding

Use the timer or the intelligent induction to get the dimmable effect for energy-saving.

Two kinds of products
Intelligent turning darker lighting system
Through intelligent turning darker lighting, initial power of 100%, dimming the power of 20%, saving energy can reach 80%.
Intelligent turning bright lighting system
Using smart turning bright lights and different lighting controller for lighting effect. The initial power of 20%, dimming the power of 100%.

Application of intelligent dimmable lighting system
Metro trackside LB energy saving
When the train go into station, stop and leave, in this period of time, lowest utilization rate of trackside LB, resulting in unnecessary waste of energy. Intelligent dimming system can reduce power loss in the period to a minimum
Application
    A. Use of the train entering the platform cut infrared sensor probe lines, thereby
    automatically dimmable control, no artificial trigger
    B. Use of train leaving the station to resume the probe infrared sensors,
    could automatically restore brightness control. 
    C. In each trackside LB, the number of lamps is 10 – 12, one controller for
    controlling one light box
    D. Lamp power of the minimum 20%, the maximum expansion of lamp life
Achievement: In the period of train stop and leave, LB energy saving to 80%